Epsom Salts Magnesium Sulphate

£3.99£18.99

Epsom Salt
Purity:  100%
Quality:  FCC / Pharmaceutical Grade

Clear
Add to Wishlist
Add to Wishlist
SKU: Epsom Category: Tags: ,

Description

Epsom Salts Magnesium Sulphate

Epsom Salt has been used for hundreds of years as a natural remedy to help relieve stress and tension.

Epsom Salt is actually Magnesium Sulphate, the name comes from the famous natural spring in Epsom, Surrey where it was first discovered. Our Epsom Salt is FCC (Food Grade) with nothing added. Its suitable for full body bathing or foot baths.

GREAT TO USE YOURSELF OR RE-PACKAGE INTO SMALLER BAGS FOR RE-SALE – TRY ADDING FRAGRANCE & SELL THEM AS SCENTED BAGS OF EPSOM SALTS.

How Can Epsom Salt Benefit Me?

It can help sooth and revive muscles
It’s great for use after exercising to help relax tried muscles.
It helps make your skin soft and feel rejuvenated.

How Can I Use Epsom Salt

Bath Soak
Dissolve Epsom Salt in a warm bath at around 37-39oC, then relax and enjoy.
For general well being use between 100g – 250g per bath for 20 minutes.
To help relieve tired and aching muscles, particularly after exercise, use around 500g per bath for 20 minutes. For a Foot Bath – Dissolve between 250g – 500g of Epsom Salt in a warm 4-5 litre foot bath at around 37oC for 20 minutes.

 

 

 

Additional information

Brand

Wax Melt Shop

EAN

7440328315326

Weight

500g, 1Kg, 2Kg, 5Kg, 10Kg

DATA

Not Classified as Dangerous for Supply:

Relevant identified uses of the substance:  Chemical manufacture, food industry, animal feed industry,
water treatment, highways deicing.

Uses advised against: No uses advised against have been identified.

Hazard Identification:
EC Classification: Not classified According to Regulation (EC) No 1272/2008 (CLP)

Hazards: Unlikely to cause harmful effects under normal conditions of handling and use.

Composition/information on ingredients:
Product description: Granular. Pure Dried Vacuum and Un-dried Vacuum.

Classification under CLP:  This product has no classification under CLP.

There is no legal requirement to provide an SDS or information required under article 32 of REACH for this product.

Product is non-combustible.

First Aid Measures: 

Skin contact: Wash skin with water
Eye contact: Flush with clean water/eyewash for up to 15 minutes.
Ingestion: Wash out mouth with water and give 200-300 ml (half a pint) of water to drink.
Obtain medical attention if ill effects occur.

CHEMICAL SPECIFICATION:

All values except moisture are calculated on a dry basis. Test methods used
are BS998:1990 or equivalent, except appearance which is a visual assessment.

PROPERTY                 UNIT                           SPECIFICATION         TYPICAL ANALYSIS
Appearance                                                  White Crystalline
Assay                       %m/m NaCl                  ≥99.9                          99.9
Moisture                    %m/m H2O                   <1.0                                0.1
Insoluble matter         mg/kg                           <50                             <10
Alkalinity                    mg/kg Na2CO3            <100                              68
Sulphate                    mg/kg Na2SO4            <300                            200
E535, Sodium HexacyanoferrateII
mg/kg Na4Fe(CN)6       <15                                 7
Total Iron                    mg/kg Fe                       <5                                  1.8
Total Calcium              mg/kg Ca                       <5                                 1.1
Total Magnesium        mg/kg Mg                       <1                               <0.1
Total Copper               mg/kg Cu                      <0.2                               0.05
Total Arsenic              mg/kg As                      <0.2                             <0.2
Total Lead                   mg/kg Pb                      <0.05                             0.01
Total Cadmium            mg/kg Cd                       <0.01                          <0.001
Total Mercury             mg/kg Hg                       <0.05                          <0.03
Total Bromide             mg/kg Br                        <50                             32

PHYSICAL CHARACTERISTICS
Typical Sieve Analysis                                        %Through Sieve
                                       3.35mm                                 99.3
1.7mm                                 52.5
0.6mm                                   1.7

Note that the specification for passing 0.6mm sieve is 10% maxim
Hydrosoft Granular are crystalline beads. The unique manufacturing process achieves food-grade purity and absence of mushing problems. The specification is assured by an audited Quality System to ISO 9001:2000 and the manufacturing process is accredited to the BRC Technical Standard.
Important Note: This data is given in good faith and correct at the date of publication, but it is for the users to satisfy themselves of the suitability of the
product for their purposes.

Reviews

There are no reviews yet.

Be the first to review “Epsom Salts Magnesium Sulphate”

Your email address will not be published. Required fields are marked *